ShavingUniverse.com

Register a free account now!

If you are registered, you get access to the members only section, can participate in the buy & sell second hand forum and last but not least you can reserve your preferred username before someone else takes it.

The Caerbannog - 3D printed capless SE razor

sɐǝɹpu∀

Well-Known Member
The files for the Caerbannog capless razor are now available for non-commercial use:
Please, Log in or Register to view URLs content!

You'll also need to print the handle:
Please, Log in or Register to view URLs content!

You will also need:
  • Three 3mm × 2 mm round magnets of grade N52
  • Superglue for the magnets and the handle
  • A small file in case the tabs are a smidgen too tight
  • An injector blade
The razor takes an injector blade. There is indeed no cap.
The blade is held in place with three small, yet strong, magnets and two small tabs.
It looks scary, but I like the way it shaves.

movie06.gif

IMG_8673.JPG

IMG_8674.JPG
 
Top