ShavingUniverse.com

Register a free account now!

If you are registered, you get access to the members only section, can participate in the buy & sell second hand forum and last but not least you can reserve your preferred username before someone else takes it.

Punktal

efsk

Absurd hero
Moderator
SU-Patron Gold
I'm in the midst of figuring out more about this brand and where it came from, so more on that later (unless y'all have some info, which you are very welcome to share). First some razors.

The next few posts will detail this beautiful trio of slants:
rgb1.jpg
rgb2.jpg
rgb3.jpg
 
First the Punktal TR66a. A slant of the non-torqued variety, instead you can tilt the head. It has three positions, varying from nearly regular to beyond 45° which even for me is unusable.
Apart from the fact that I've gotten this NOS there are two points of interest: the head is a lathercatcher, not often seen on a DE, and it is differential: it has one side marked "Vorrasur" that forces a different angle than the other side: Vorrasur rides the comb, the other side the cap.
DSC03879.JPG
DSC03880.JPG
DSC03882.JPG
DSC03883.JPG
DSC03884.JPG
DSC03885.JPG
DSC03886.JPG
DSC03888.JPG
DSC03891.JPG
DSC03892.JPG
DSC03893.JPG
DSC03894.JPG
DSC03895.JPG
DSC03896.JPG
DSC03897.JPG
DSC03898.JPG
DSC03899.JPG
DSC03900.JPG
DSC03901.JPG
DSC03903.JPG
DSC03904.JPG
DSC03905.JPG
DSC03906.JPG
DSC03907.JPG
 
Next the TR66. Same razor as above, except the handle is metal. Paperwork is identical, so not photographed.
Funny thing is: These razors were on the bay simultaneously, and I bid on both. Not sure whether I lost on the 66 or the 66a, but learned later the one I did not get went to the wife of a North-German razor-afficionado I sometimes trade with. She bought it as a present for him on occasion of their weddinganniversay. He liked the razor, but not how it shaved, so then traded it against something I had. I don't know what the impact of this was on his marriage.
DSC03511.JPG
DSC03512.JPG
DSC03514.JPG
View attachment 11468
DSC03517.JPG
DSC03518.JPG
DSC03519.JPG
DSC03520.JPG
DSC03522.JPG
DSC03523.JPG
DSC03525.JPG
DSC03527.JPG
DSC03528.JPG
DSC03529.JPG
DSC03530.JPG
DSC03531.JPG
 
Third, the smallest, yet most expensive (according to the box) of the three: the model 100. It has the metal handle the TR66 has, but the head is the same differential head as the Lutz and many more have.
DSC03532.JPG
DSC03533.JPG
DSC03534.JPG
DSC03535.JPG
DSC03536.JPG
DSC03537.JPG
DSC03538.JPG
DSC03539.JPG
DSC03540.JPG
DSC03541.JPG
DSC03542.JPG
DSC03543.JPG
DSC03544.JPG
DSC03545.JPG
DSC03546.JPG
 
The Punktal 100 was also available in a bit more luxurious version. Same, well a bit larger, blue shipper (which unfortunately I don't have), that contained a white plastic case with room for razor and blades. The amazing thing is, that case was shaped like a razorblade.
DSC04709.JPG
DSC04710.JPG
DSC04711.JPG
DSC04712.JPG
DSC04713.JPG
DSC04714.JPG
DSC04715.JPG
DSC04717.JPG
DSC04719.JPG
 
The nr 104 appears to be a cheaper, simpler model, at 1,25 DM. Closed comb, and a traditional ball end handle. I got three in this box, with almost black handles, I assume some silver plating though.
SAM_2313.JPG

SAM_2314.JPG
 

Attachments

  • SAM_2315.JPG
    SAM_2315.JPG
    101.4 KB · Views: 7
  • SAM_2312.JPG
    SAM_2312.JPG
    163.3 KB · Views: 7
Another pretty one. Shipper, missing one flap, dark blue with gold. Punktal typenumber is 101. The razor has one OC and one SB side, as have more vintage razors, but we now know why iKon branded their dualcombed razor 101.
This razor shaves utterly terrific.
DSC03665.JPG
DSC03666.JPG
DSC03667.JPG
DSC03668.JPG
DSC03669.JPG
DSC03671.JPG
DSC03672.JPG
DSC03673.JPG
DSC03674.JPG
DSC03675.JPG
 
Punktal has Punktal on the bottom of the handle, Emir usually a red rhombus with an E inside somewhere on the side of the handle, but not always. The head has been sold as Engels as well, on a less elaborate handle. Possibly your handle has been sold under other brand names as well.
 
6E6369E0-D022-4499-BFD5-1493B980A495.jpeg


I always find that very difficult to say because I miss the necessary knowledge of Vintage scrapers in its entirety.

That's why I love to read all your posts. :)

But forward I see one big difference with the above shown bottom plates compared to those of my Karl Engels.

In the pictures above you can see that the bottom of the top plate has a nice flowing curve in contrast to that of my Karl English which has two sharp bends.

The same is the handle which is a few mm. sunk in the top plate while screwing it in place.
 
Back
Top